Fuel Line
 

What is the best type of fuel line to run from the pump up to the regulator, braided line, alum. hard line, etc? Thanks.

Re: Fuel Line
 

I've found the braided-line works best for me. The 1/2" aluminum that I used first was harder to bend properly, and difficult to secure to the chassis without deforming. Just my experience, but 20 minutes, two AN fittings and 6 insulated clamps drilled and screwed to the frame and I was done! And no pesky leaks either!

I also found a easy way to attach the fittings to the braided-hose. It's called a "Koul Tool", and it makes the job almost painless! :)

http://www.koultools.com/

Lew

Re: Fuel Line
 

lew do you have a good supplier for ( kool tool ) and part number. thanks jim

Re: Fuel Line
 

Look at the lightweight braided line, not the stainless braided stuff. Stay away from the hard lines, like aluminum. With vibration it will work harden the tubing and create potential cracking.

Sean