BBM/Hemi stocker oil pan
 

I would like to know if I should order the BBM/Hemi oil pan from Moroso PT# 19760 or Milodon PT# 19760? What is everyone using? Pro's? Con's?

Re: BBM/Hemi stocker oil pan
 

Re: BBM/Hemi stocker oil pan
 

Classification guide only gives 2 different part numbers, you cant use just any stock looking pan can you?

Re: BBM/Hemi stocker oil pan
 

That style pan won't fit in a A-body car,but I really like the Moroso pan,it fits any Mopar and it's made well.

Re: BBM/Hemi stocker oil pan
 

I'm pretty sure Tom is putting a early B body together and it will fit if you notch the K member like Mark said.

Re: BBM/Hemi stocker oil pan
 

Phil,
I posted the info to help someone that might read the thread,and also experience from using the E-body pan. The Moroso pan fits allcars without notching the K-member.

Re: BBM/Hemi stocker oil pan
 

Chris,
It's a real pain in the ***** to check bearings unless you notch the K member and the bearings need to be checked quite often. I guess if you don't have one of these cars you probably are not aware of that though.
The pan you are recommending is listed as a 4 quart capacity. Do you think that is wise considering the RPM Tom is going to be turning? This is not a warmed over 440 in a street driven Dart.
Tom, If you use one of those pans you are asking for trouble. Take a look at the factory Nascar pans, They are available on ebay once in awhile. You are going to want to notch the K member for clearance no matter which pan you end up buying.
Do not buy one from my buddy in Waldo Florida, He will sell you the ebay one I listed and charge you $300.00 for it. Been there done that. Good luck on your project.

Re: BBM/Hemi stocker oil pan
 

Yep,I have a B-body car and a a-body with 440's.I can pull both pans by dropping the idler arm. Moroso has a 5 qt Hemi pan as does Milodon.

Re: BBM/Hemi stocker oil pan
 

What year is your B Body Chris?

Re: BBM/Hemi stocker oil pan
 

1970.