200 trans in Camero, x-member
 

What cross member is used to put a 200 metric trans into a 70-71 Camero stocker? Have tried a T350 x-member and a T400 and they didn't work (not close). Anyone have an idea what has been used by other racers using this trans?

Thanks
Bill

Re: 200 trans in Camero, x-member
 

http://www.transdepot.net/TH350-Cros...1974_p_86.html

The one you have should work according to this listing

Re: 200 trans in Camero, x-member
 

What's a camero?

Re: 200 trans in Camero, x-member
 

We use the stock turbo 350 crossmember in both of our cars. If it doesn't work something else must be wrong.

Re: 200 trans in Camero, x-member
 

That's right "Professor",, theres no E in Camaro,,, the classic mistake since 1967, but don't trust Chad and myself,, go look at your car!
Danny Durham

Re: 200 trans in Camero, x-member
 

350 crossmember in my chevelle and it fits fine, start looking elsewhere

Re: 200 trans in Camero, x-member
 

In our 1967 Camaro stocker the T-350 crossmember fit the T200, however when we added an aluminum deep pan on the transmission we had to notch the front edge of the crossmember to clear. Probably a quarter to a half inch deep and 8" or 10" width of notch did provide clearance along the front edge of the factory crossmember.