2001 CAMARO Rear Wheel Size & Back Space
 

A friend is needing help in obtaining the correct width and back space sizes, for the Rear of his 2001 Camaro...

The car has an o.e.m. width Moser 12 bolt conversion...

And he'd like to run as wide a wheel as possible that fits within the o.e.m. wheel house and the width of the axle.

Any info is appreciated. Thank You!!

Re: 2001 CAMARO Rear Wheel Size & Back Space
 

Larry on a stock width rear a 15x10 with 7.5 backspacing is very common. I had a 15x10 with 8 inch backspacing that tucked it in a tad more and looked great. In the 8 inch backspacing wheel, it would have to be a bogart or holeshot wheel to get that specific 1/2 inch increment backspacing. Where 7.5 backspace is common on any wheel


Tim.

Re: 2001 CAMARO Rear Wheel Size & Back Space
 

Is the wheel you are describing this wheel, in the photos...

the front space looks Deeper than what you are describing?

btw - Good Looking Car!!

Re: 2001 CAMARO Rear Wheel Size & Back Space
 

I run Billet Specialties Street Lites, 15x10 with a 7.5" backspacing.
Billet Specialties makes these specifically to fit the 4th generation F-Bodies.
This is on a stock rear end.

Re: 2001 CAMARO Rear Wheel Size & Back Space
 

What is the weight on those Billet Specialties?

Bill Lent
O/SA 3158

Re: 2001 CAMARO Rear Wheel Size & Back Space
 

Their website does not specify the weight.
You may want to contact their Customer Service Department.

800.245.5382

Re: 2001 CAMARO Rear Wheel Size & Back Space
 

I ran weld rt-s 15x10 with 7.5 backspacing it fits really good I did have to bfh a little bit on the inside of the wheel well for the tire

Re: 2001 CAMARO Rear Wheel Size & Back Space
 

Now THERES a tool every racer should have,,,, I love my BFH!
Danny Durham