CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   swing out side bar latch (https://classracer.com/classforum/showthread.php?t=53770)

Dragsinger 06-30-2014 07:43 PM

swing out side bar latch
 
In the Alston Catalog a spring loaded swing out latch is listed. Do we have any feedback about that latch? Any other ideas or options?

http://www.alstonracing.com/rollbars.html part #101520

Jeff Teuton 06-30-2014 10:20 PM

Re: swing out side bar latch
 
I had one (spring loaded) in my Super Bee for all the time I had it. My new cars have the simpler version with a pin. Works well. Super Simple. The spring loaded one will pinch you and you will bleed all over the beer.

Geerhead55 07-01-2014 12:47 AM

Re: swing out side bar latch
 
I agree with Jeff,,, go with the pin setup.
Danny Durham

Adger Smith 07-01-2014 04:48 AM

Re: swing out side bar latch
 
I used the spring loaded and when I got to racing the car I found out my bad arm didn't have enough strength to work it. I usually have to have help from the outside un latch it. Next time out I will have pin.

Kegracing 07-01-2014 12:06 PM

Re: swing out side bar latch
 
I agree with most above... I had spring in a car in the past, but put the pin style in my Firebird I have now. I like the pin, easier. Might not look as "trick" but is simple and works.
I would use another pin if I was doing it again.

Ken


All times are GMT -4. The time now is 09:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.