1967 camaro stocker
 

i am starting the build of a 67 camaro stocker 396 325 hp was curious of a few things like rear wheel backspace can i run a rear spoiler with a cowl hood can i move the rear shocks on the back of the car? It has been slightly mini tubbed do i have to put that back to original

Re: 1967 camaro stocker
 

You need to get a rule book and go from there.

Re: 1967 camaro stocker
 

-Cowl hood: That's only for some '69's. Your combo used the raised SS hood.
-Rear shocks: Must be in original location.
-Mini tubs: Must be original inner fender wells.

As far as spoilers...not all '67-'69's can use the same combinations of f/r spoilers. I'm sure someone will clear up what can be run on your '67, though. -Al

Re: 1967 camaro stocker
 

I run a 396/325 motor. Look for the "290" heads, they came on 427/390 motors. Highest intake volume oval port heads made-

Good Luck!
Will Lamprecht 65 Impala I/SA 396/325 in progress.

Re: 1967 camaro stocker
 

15x10 w/5.00 backspace here. Pretty close, about the most you can get under these cars.

http://i434.photobucket.com/albums/q...ps3127bc87.jpg

http://i434.photobucket.com/albums/q...ps14449864.jpg

http://i434.photobucket.com/albums/q...ps90ecf032.jpg

Re: 1967 camaro stocker
 

WOW !!! Look @ all the shiny. :) Nice.

Re: 1967 camaro stocker
 

Look'n Good!!