CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Sunnen CV 616 (https://classracer.com/classforum/showthread.php?t=56722)

R Hastings 02-04-2015 03:46 PM
Sunnen CV 616
 
Had to hone a block this morning. Regular operator home sick. It seemed that no mater what settings were used the auto feed wouldn't keep consistent pressure. pressure would back off unless I kept slight pressure on feed wheel with my hand. Rough hone using diamond stones. Any thoughts on what may be wrong.

carl hinkson 02-05-2015 09:44 AM
Re: Sunnen CV 616
 
Quote:
Originally Posted by R Hastings (Post 460907)
Had to hone a block this morning. Regular operator home sick. It seemed that no mater what settings were used the auto feed wouldn't keep consistent pressure. pressure would back off unless I kept slight pressure on feed wheel with my hand. Rough hone using diamond stones. Any thoughts on what may be wrong.
If your using diamond stones you may have to adjust pressure feed wheel to a higher number.

Mike Taylor 3601 02-05-2015 10:06 AM
Re: Sunnen CV 616
 
I would say needed more pressure also.
Mike Taylor 3601

R Hastings 02-05-2015 09:07 PM
Re: Sunnen CV 616
 
Thanks for the replies. We tried adjusting the pressure wheel up to the max with no improvement. We also tried regular roughing stones with the same results. We are going to try the tech line for suggestions.

Randy Hastings

rickseeman 02-06-2015 10:29 AM
Re: Sunnen CV 616
 
Increase the feed under the head.


All times are GMT -4. The time now is 04:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.