Q jet base gaskets
we have a J/SA ,255hp 69 Chevelle wagon, Does anyone have the part number of the 1/4 inch base gaskets for a Quadura jet ? Thanks
|
Re: Q jet base gaskets
Fel Pro 17845 is one option.
|
Re: Q jet base gaskets
Jegs/Summit has most of the Fel Pro numbers ; I use #1908 .
|
Re: Q jet base gaskets
Also look up Chryco Q'jet base gaskets.
|
Re: Q jet base gaskets
I have always been under the impression that rule book called out "maximum two 1/4" carb base gaskets"? I was told by reputable long time stock racer that its just two gaskets with no specific thickness! Not sure it make any big difference but dose anyone have clarity?
Jim |
Re: Q jet base gaskets
i use a couple fel pro 60335 gaskets
|
Re: Q jet base gaskets
Quote:
|
Re: Q jet base gaskets
2 Attachment(s)
Bought theses off Mike Keown many years ago. They are 1/4 inch thick
|
Re: Q jet base gaskets
Jeff, I think that open style gasket is OK for a open plenum intake manifold,, but on a stocker cast manifold, it should be a 4 hole , shouldn't ?
|
Re: Q jet base gaskets
For what its worth, several years ago we tested with the open gasket vs. the 4 hole gasket on the dyno and the 4 hole gasket made slightly more power and torque with our combination.
|
All times are GMT -4. The time now is 12:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.