CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   Chassis Builders??? (https://classracer.com/classforum/showthread.php?t=59352)

GregP 09-01-2015 02:34 PM
Chassis Builders???
 
First off I hope I am posting this in the correct area. I am currently building a 85 Camaro for stock elem. I am in search of a shop that is reputable for installing roll bars and cages. I live in south Mississippi, if anyone has a suggestion for a shop within reasonable distance please share the info with me. Thanks in advance.

Ron Middleton 09-03-2015 09:02 AM
Re: Chassis Builders???
 
Greg,
Not many choices in our area but since it's a Stock Eliminator car requirements are a lot less than say a 25.2 SFI certification. Depending on if you want mild steel or not will make the selection more critical. Greg Gatewood over in Brandon, Ms. can do nice work at reasonable price but not always as timely as some would like(phone (601) 594-5611). There are several in southern La. that could do a nice job. Randy Auwarter here in Jackson can do a nice job but pinning him down to do the job can be tricky. Out side of that, you'd probably have to take it a good way away to someone like B & B in Tn. or someone comparable.

GregP 09-03-2015 09:04 AM
Re: Chassis Builders???
 
Quote:
Originally Posted by Ron Middleton (Post 481120)
Greg,
Not many choices in our area but since it's a Stock Eliminator car requirements are a lot less than say a 25.2 SFI certification. Depending on if you want mild steel or not will make the selection more critical. Greg Gatewood over in Brandon, Ms. can do nice work at reasonable price but not always as timely as some would like(phone (601) 594-5611). There are several in southern La. that could do a nice job. Randy Auwarter here in Jackson can do a nice job but pinning him down to do the job can be tricky. Out side of that, you'd probably have to take it a good way away to someone like B & B in Tn. or someone comparable.
Thanks for that info. I will P.M you.

GregP 09-03-2015 09:17 AM
Re: Chassis Builders???
 
Quote:
Originally Posted by Ron Middleton (Post 481120)
Greg,
Not many choices in our area but since it's a Stock Eliminator car requirements are a lot less than say a 25.2 SFI certification. Depending on if you want mild steel or not will make the selection more critical. Greg Gatewood over in Brandon, Ms. can do nice work at reasonable price but not always as timely as some would like(phone (601) 594-5611). There are several in southern La. that could do a nice job. Randy Auwarter here in Jackson can do a nice job but pinning him down to do the job can be tricky. Out side of that, you'd probably have to take it a good way away to someone like B & B in Tn. or someone comparable.
I dont think your settings will allow a P.M its not letting me send it.


All times are GMT -4. The time now is 03:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.