CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Sears craftsman drill press (https://classracer.com/classforum/showthread.php?t=5989)

FED 387 07-01-2007 09:35 PM

Sears craftsman drill press
 
Just got a Sears 13 inch benchtop drill press with a load of tools I bought at an estate sale... No chuck key anybody know where to find a model number on this thing ???? I'v looked all over cannot find anything except on the motor and nothing that Sears recognizes. It has the numbers of JT39 and 13MM stamped on the chuck but nothing else--- Thanx Dick

Bruce Fulper 07-03-2007 01:11 AM

Re: Sears craftsman drill press
 
Ain't Sears great? I'll never buy another Sears anything. The absolute worst customer service I've ever been exposed to from a store of that caliber. All their batteries go obsolete in a year. Can't get parts when you DO have a two year old part with a part number. (Portable air compressor in one of my cases.) Nope. No more Sears. Good luck with your drill press. I have a box of chuck keys you're welcome to try. Send a pic to www.IndyWinner@dslextreme.com - maybe I can help.

John Dinkel 07-03-2007 02:21 PM

Re: Sears craftsman drill press
 
Any good hardware store should have one that fits. Their are several sizes to chose from.Good luck.

FED 387 07-03-2007 07:22 PM

Re: Sears craftsman drill press
 
Sorry you had such bad luck-- No problems here just trying to find a chuck key-- The drill press is probably worth $200 plus I'll find a key will probably have to take the chuck out and go to the store and find one thought maybe someone new of a better way--- No need to get your shorts in a bind---Thanx to those who replied--- Comp 387

Donnie Moore Jr. 07-03-2007 09:35 PM

Re: Sears craftsman drill press
 
Quote:

Originally Posted by FED 387 (Post 34111)
Just got a Sears 13 inch benchtop drill press with a load of tools I bought at an estate sale... No chuck key anybody know where to find a model number on this thing ???? I'v looked all over cannot find anything except on the motor and nothing that Sears recognizes. It has the numbers of JT39 and 13MM stamped on the chuck but nothing else--- Thanx Dick

hey check with a matco tool dist. (if you have one close to you) #ck12050 has 4 different sizes for 3/8 chuck, #ck12060 1/2 I have sold a lot of those to people that have lost chuck keys just read your post again ck12060 should work for you because 13mm is is stamped on 1/2 chuck hope this helps

FED 387 07-03-2007 09:45 PM

Re: Sears craftsman drill press
 
Thanx Donnie got a matco just down the road---Comp 387

FED 387 07-04-2007 04:03 PM

Re: Sears craftsman drill press
 
Finnaly found the sears model number. Under the base plate was a sticker kinda scratched up but readable--- anyway went to the surplus store got a chuck works fine---- cost $2!!!!! Sears wanted $10.49 plus $6.95 shipping do not stock it.... Comp 387


All times are GMT -4. The time now is 06:22 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.