CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Lowering Springs (https://classracer.com/classforum/showthread.php?t=61610)

The Hawk 03-19-2016 12:20 PM
Lowering Springs
 
I recently built a `79 Firebird with an aluminum headed big block Chevy and the front end still sits up a fair amount. There`s about 2 1/2 to 3" between the wheel opening and the top of the tire- 27" M/T front runners. I`m not fond of torching a partial coil out so I`m looking into new springs to drop it about 2". Any recommendations or ideas? Thanks in advance.

kansas stocker 03-19-2016 05:05 PM
Re: Lowering Springs
 
Lane,
I've had good luck with two inch lowering spindles.
Speedway, CPP, etc.
Pete

Jim Wahl 03-19-2016 07:41 PM
Re: Lowering Springs
 
Eibach makes springs for that. Jim

http://eibach.com/america/

.


All times are GMT -4. The time now is 04:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.