CLASS RACER FORUM - Gm 3964290 396/427 heads, alum rods DOAE-9425-L intake

We have a set of GM 3964290 heads in great shape. These heads were done by bridges in 07 and on a car for a short time then we took them in on trade for a bunch of SS stuff .. They are complete with screw in studs ,springs, retainers ...

1 set of GRP Rods like new less than 30 runs 5.570 Honda rods 927 pin 849 wide 200 obo

1 set of BME bbc 6.150 long 2.0 rod .990 pin .935 wide 40 runs 125.00

2- DRCE2 Pontiac pro stock intakes 1 Schmidt 1 lump. 500 ea obo

2 - DRCE2 Pontiac pro stock LSM cams

1 lot of 77 titanium valves take outs from either pro stock(98-01) or comp splayed valve 150 shipped..

8- BME 4.225 bore 1.165 .990 pin 3 ring slight dish for lump splayed valve heads 200 obo

Splayed valve rockers I'm pulling part numbers now but we have 2 sets ob stands and 6 boxes of rockers and I'll list those later today in a reply..

1 set of billet splayed main caps for sbc block. They came off a gm rocket block sbc
200 obo

1- stef's oil pan off sbc rocket block external pump wet w/full kick out on pass side out of A/SM car with screen.. 200 obo

5 SBC splayed valve cams by Bullet 3- 55 mm , 2-60. All for 355-400 ci make offer

5 BBC super stock cams out of 396 325 stick combo

1 set of Lemmons I think headers for tall deck std head BBC in 68 Camaro with magna flow bullet mufflers and collectors. 2 3/8 and 4.5" they need 2 tubes repaired 700 obo was used in my 1968 Camaro when we ran outlaw 10.5

Holley Anninilator 800-400 nib 125 shipped

1 set of Grumpy Jenkins split 2 barrels off Dave Northrops D/A Buick with top,air pan,carbs and linkage 675 obo or complete short deck for 1000.

Call Scott Hutton 615-429-8895 or txt if no answer