Brake system stuff
 

Need advice on planning the brake system on a e-body stocker. I have strange discs front and back. Planning on using a 2 step with an adjustable pressure switch. Question are is a line loc and adjustable proportioning valve a must ? And does the pressure switch go on the front or rear circuit ?

Re: Brake system stuff
 

Pressure switch is on the front on mine without a p valve. Hope this helps.

Re: Brake system stuff
 

Thanks Larry. Ok, no stock Prop valve, just a distribution block.

Re: Brake system stuff
 

Same as Larry's with pressure switch between master cylinder and line lock.

Re: Brake system stuff
 

Brian, what pressure switch are you talking about? Mike

Re: Brake system stuff
 

Mike Delahanty had posted a link in an earlier thread, I have it bookmarked on another computer.

Re: Brake system stuff
 

I use a Hurst Line Lock and my pressure switch screws right into an extra port on the LL.

Re: Brake system stuff
 

Eman, sounds simple enough. I think I'll do that. Not really decided on an adjustable prop. valve. If I have no valve, I should have 50/50 brake bias. If that doesn't work well enough, I can always add one to put more bias on the rear wheels.