Alf Wiebe contact info
 

Anyone?

thanks

Re: Alf Wiebe contact info
 

Good luck....I have tried for a few months without success.

Re: Alf Wiebe contact info
 

I hear his rear suspensions for A body are the way to, if any body sells them for him that would work too. Dick millers look good too. I guess we'll try that. Any thoughts are appreciated.

Thanks

Re: Alf Wiebe contact info
 

Word has it that Alf is not building suspension kits anymore, at least for the time being. You might also look at the HR Parts setup.

Re: Alf Wiebe contact info
 

Go with the Global West control arms in lieu of the Dick Miller stuff.

Re: Alf Wiebe contact info
 

sorry double post.

Re: Alf Wiebe contact info
 

Guess I should mention this is on a 70 Chevelle with 454. Ill check out the global west stuff,

thanks

Re: Alf Wiebe contact info
 

I have a 70 chevelle 454 I have the HR Parts n stuff. real high quality. I use the rear bolt in anti roll bar with NO front sway bar. car drives great. anyone have a 396 or a 454 engine for a 70 stock or super stock that needs some testing in a real SS car : ) does anyone run super stock with stock stlye suspension and a 11" tire?

Re: Alf Wiebe contact info
 

Is there a website for the HR stuff and are weld in anti roll bars legal in stock.

thanks

Re: Alf Wiebe contact info
 

Check out these parts from BMR. Our customer picked up quite a bit with the rear sway bar!
http://www.bmrfabrication.com/A-Body.htm