68-70 Nova Stocker Pinion Angle
 

SB 350 Stocker 12 Bolt. TH 200 Transmission, with Caltrac bars and Mono Leaf springs. What would be the proper Pinion angle to start with :confused:

Thks for the Help:).

Re: 68-70 Nova Stocker Pinion Angle
 

Some is good, a little more is better. More is better. If you have trouble hooking the driveshaft it, it mite be too much. Dont be bashfull!

Re: 68-70 Nova Stocker Pinion Angle
 

I run 3 degrees down on ours.

Re: 68-70 Nova Stocker Pinion Angle
 

6 degrees here in NY

Re: 68-70 Nova Stocker Pinion Angle
 

Its at .06 now. Was going to install 2 degree wedges to start but maybe I should install the 4 degrees and see if it likes it to start. Anybody play with a pyrometer readings at the U joints?, checking temps with Pinion angle changes to determine best angle. Thinking is, closer the angle is under a load, the less heat is being generated by the U joint as it rotates.

:confused::confused::confused::confused::confused:

Re: 68-70 Nova Stocker Pinion Angle
 

Just a couple or three degrees in Boulder City works great.

Re: 68-70 Nova Stocker Pinion Angle
 

Call Travis at Calvert racing.