CLASS RACER FORUM - MSD crank trigger air gap????

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)

- - MSD crank trigger air gap???? (https://classracer.com/classforum/showthread.php?t=6748)

art leong

08-24-2007 09:55 PM

MSD crank trigger air gap????

What should the air gap be on a MSD crank trigger?

Oldtimer

08-25-2007 12:16 AM

Re: MSD crank trigger air gap????

Art, .050 if my mind dont pop out of gear seems to be the # I remember.

Kevin Love

08-25-2007 12:23 PM

Re: MSD crank trigger air gap????

MSD recommends a minimum of .050 and states that up to .080 is ok

Steven W Johnson

08-28-2007 11:43 AM

Re: MSD crank trigger air gap????

Quote:

Originally Posted by Rick Bailey (Post 38718)

Another method..............turn the sensor in untill it touches the ring, then turn it out one complete turn. This will give you your .050.

This is also the proceedure for crank/rpm sensors on semi's that are blind.

Rick

Better watch that one as some (mine) balancers want to jump around more than a few thousands! Watch for scratch marks on the ring! If so back off gap.
MY 02

All times are GMT -4. The time now is 09:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.