need help with innolvate dl-32
 

can't figure this thing out it is a innolvate dl-32 and i can't get this thing to work
help

Re: need help with innolvate dl-32
 

Are you able to monitor the AFR while the car is running, but can't figure out how to record and play back?
If so, it doesn't have play back capability. It took me a while to figure out that you can record for only a very brief period of time and download a stiil graph onto your laptop, but the graph axis will be the time from when you push the red button, not RPM. You can usually tell when the car launched, because the graph jumps sharply, or at least it does with my Q-Jets.

Or you can buy another module from Innovate that will record and playback, plus it has an rpm pickup. I think it costs another $350. Or link it to a data acquisition system for a few grand more.

Re: need help with innolvate dl-32
 

Vic, if you still need help send me an email to brian@toledo-dyno.com with your contact info. I am an Innovate dealer and I run a DL-32 in my stocker.

Brian Seibenick
R/SA 3137/3157

Re: need help with innolvate dl-32
 

tony
are you going to etown???

i can't get anything to work oil or fuel pressure, wter temp drive line or feul ratio
tack reads 800 low???
can't figure out anything
do not know where to hook the wires from the sensors
vic guilmino

Re: need help with innolvate dl-32
 

I'm not racing, but I have an appointment in Asbury Park on Saturday at 11:00 AM, which is only 20 minutes from the track. I was planning to stop at the track on the way home to watch first round elims.

I'll bring my laptop and look for you. I think I can get the AFR readings for you. As for the rest, it may turn out to be a case of the blind leading the blind, but I'm willing to try if you are.

E-mail me at acurcio910@aol.com and I'll send you my cell number.