95 LT1 Camaro info
 

I am building a 95 LT1 Camaro stocker and need some info. I don't see a timing set available with an indexable crank gear, what is everyone using?. What's the easiest way to mount a metric 200 to the crossmember?. Who makes a lightweight driveshaft that will bolt right in with the metric 200 and a 12 bolt?

Thanks

Re: 95 LT1 Camaro info
 

RJ...for the driveshaft call dyno tech at 248-362-2777 in troy michigan...luke

Re: 95 LT1 Camaro info
 

RJ, Rollmaster makes the timing set you want. As for the 200, you just need to weld a Tab on your Crossmember for the mount to connect to! Hope this helps!

Re: 95 LT1 Camaro info
 

Hey Woodrow. Hope things are going well. Would you happen to have a part # for the timing chain assembly? Is there a gear available that doesn't drive the waterpump? Let me know on here or e-mail me direct at pmracingengines@aol.com. Thanks in advance, Bruce

Re: 95 LT1 Camaro info
 

Bruce, try Rollmaster P/N CS1080.
http://www.sdparts.com/product/SDCS1...TimingSet.aspx

You can get it at a great price from this guy in Ebay.
http://cgi.ebay.com/ebaymotors/SB-Ch...QQcmdZViewItem

Re: 95 LT1 Camaro info
 

A double roller chain will hit the front cover up at the cam gear area. A little material removed from the inside of the cover and maybe 2 cover gaskets for a little extra room.