CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Tuesday H.P. (https://classracer.com/classforum/showthread.php?t=78779)

Garry Dearn 03-10-2021 01:31 AM

Tuesday H.P.
 
Here it is gang-22 H.P for 2009-2013 Dodge Challengers. From 300-322 H.P.-Stock Automatic Only.

Paul Wong 03-10-2021 01:51 AM

Re: Tuesday H.P.
 
Without a tear down as well.

Pete Lanciers 03-10-2021 02:02 AM

Re: Tuesday H.P.
 
Quote:

Originally Posted by Paul Wong (Post 636186)
Without a tear down as well.

Ok Paul I’ll bite, why not... did the culprit bolt before a request could be made? Was he there for eliminations or just took the trophy and ran?

Jim Bailey 03-10-2021 08:59 AM

Re: Tuesday H.P.
 
The engine was still sealed from a teardown last fall ..... Maybe someone can highlight us as to why he was removed from the ladder...?

Jim Bailey 03-10-2021 09:33 AM

Re: Tuesday H.P.
 
Additionally, FYI , he was torn down (again) at Gainesville.

Jim Bailey 03-10-2021 09:48 AM

Re: Tuesday H.P.
 
Also, he wasn't removed from the ladder, he was a no show. ( probably because his engine was completely apart ...)

GTS340 03-10-2021 11:08 AM

Re: Tuesday H.P.
 
I take it you were there Jim watching these tear downs. Hard to believe a stock bore production engine can seal up that well to make near 600hp. If not more! He goes .325 green and catches a second under competitor by the 660' is amazing all in its own. He has plenty left after coasting from the 1100' mark for all the F,G and still H cars now even at 322hp. Might need a better reaction though. That's what happens when you show that kinda performance. You bring extra gaskets.

Paul Haszlauer

jamie2370 03-10-2021 11:42 AM

Re: Tuesday H.P.
 
Quote:

Originally Posted by GTS340 (Post 636203)
I take it you were there Jim watching these tear downs. Hard to believe a stock bore production engine can seal up that well to make near 600hp. If not more! He goes .325 green and catches a second under competitor by the 660' is amazing all in its own. He has plenty left after coasting from the 1100' mark for all the F,G and still H cars now even at 322hp. Might need a better reaction though. That's what happens when you show that kinda performance. You bring extra gaskets.

Paul Haszlauer

Looks like stock bore is 3.920 and MAX bore is 4.000. Thats .080 over and Diamond makes an approved piston for it, not to mention it is a +18 cc dome piston. Seems pretty easy other than you need a couple dead bodies in the trunk to make weight lol Also he only went 60 to 80 under last year. I think the engine really likes the bigger, lighter, better ring package, pistons.....just saying

GTS340 03-10-2021 12:01 PM

Re: Tuesday H.P.
 
I have said this before. I was the one who got the piston approved which happened the last few days of Jan 2021. The only thing available before that time (The record set in Nov 2020) had to be a OEM piston. Chrysler doesn't make an oversized piston. You can buy an oversized piston from other vendors but that isn't approved. That is why I worked with Diamond and NHRA to get it excepted. It took a while. Is it stock bore, Left and right offset piston with a press on pin like stock OEM? If so it is good to go or does he claim stock piston and it isn't?

Kenney Kelley 03-10-2021 01:02 PM

Re: Tuesday H.P.
 
If the car can run that fast it might be in the wrong class to start with. I think the car with the extra 22HP. only needs to add 92 Lbs. to move to G/SA or remove 69 Lbs. and move up to F/SA. This is from the 3620 Lbs. at 300 HP. that was the Min. weight at the 2021 Baby Gators for that car combination in H/SA. Kenney Kelley


All times are GMT -4. The time now is 04:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.