warning meziere
 

dont buy there water pumps purchased in 1/15/21 new in box installed 3/30/21 ran on dyno 4 pulls put in car 1 1/8 mile hit motor on water pump goes out sends back 90 days latter said bad wiring, brand new k&r wiring blow fuse said they cant replace, 450.00 down the drain buy some where else. Marvin Strickland marvstrick@nc.rr.com

Re: warning meziere
 

Sorry about your luck. I guess anything can happen.
However I have had nothing but great things to say about Meziere. I have had two of their water pumps. One on each motor and I also just bought a spare. never gone bad in the last six years or more
I just upgraded to the 55 gallon water pump and transmission pan, excellent products.
Their starters make my car sound like it’s on 16 V I have two of those, One on each motor. Again never a problem and they have always been quick to pay Contingency.

Re: warning meziere
 

I put one of their pumps in a BBmopar housing. It was blowing fuses. The impeller was rubbing on the housing. Shimmed it out with another gasket and haven't had any issues since.

Re: warning meziere
 

Wow that is very surprising. My son had a problem with a pump that was many years old. He sent it in for repair (pre pandemic) and it was repaired and returned the same day they got it.

Re: warning meziere
 

ugh
Lost a flexplate & a water pump
expensive, water pump cost a race (travel,entry, fun...gone)

Still bought another water pump, have 3

Re: warning meziere
 

I've nothing but positive experiences with Meziere for years, including a custom flexplate they made for me.

I'm not saying others haven't had problems. I'm just saying the stuff I've gotten has been real nice. No complaints.

Don's a great guy. If you have a problem give him a call if you haven't already.

Re: warning meziere
 

Had a similar thing happen at the dyno. new pump blows fuses. sent it back for repair or replace, got it back, same thing-blows fuse-. Called them and Mike suggested at the front of the pump is a plug , remove the plug insert an allen wrench and turn the pump by hand several revolutions, install plug , replace fuse , been working ever since. His reasoning is the brushes get seized(stuck) from sitting. So every spring I turn the pump by hand a few times and go racing. I no have 3 of their pumps , 2 on engines ,one for the trailer.

Re: warning meziere
 

Had a similar thing happen at the dyno. new pump blows fuses. sent it back for repair or replace, got it back, same thing-blows fuse-. Called them and Mike suggested at the front of the pump is a plug , remove the plug insert an allen wrench and turn the pump by hand several revolutions, install plug , replace fuse , been working ever since. His reasoning is the brushes get seized(stuck) from sitting. So every spring I turn the pump by hand a few times and go racing. I now have 3 of their pumps , 2 on engines ,one for the trailer.

Re: warning meziere
 

Hi Marvin, Jerry from Mezieres. I could not send a private message to you so I sent you a email. If you can please contact me, I would like to help resolve the issue with the pump.

Re: warning meziere
 

The following is my experience with Meziere. In the late nineties I purchased an electric WP for my SBC stocker. It is still on the car. I also bought a spare , it collects dust in the original packaging in the trailer. About what I expected from a company of RACERS. So sorry that you had problems, Marvin.