Anyone running a Pro Stock style engine/modern head..
 

I am in the midst of building a new truck for .90 racing. liekly mostly S/ST as its a steel truck. I am looking at engine options right now just curious if anyone has tried to run a Pro Stock cyliner head in one of these cars? Talking modern DRCE type stuff here not old 18 degree stuff like the big chief etc...Thinking of possibly doing a larger cube deal with a modern head. My buddy who is an engine builder thinks its very doable but I am a tad more skeptical so seeking any real world experience before I make a decsion

Re: Anyone running a Pro Stock style engine/modern head..
 

Al,

I think you know a lot of the Comp guys, is the 700+ CI engine Ryan Priddy runs a DRCE?

Bill

Re: Anyone running a Pro Stock style engine/modern head..
 

Are you bored? Or just looking for a new challenge? Lol

Re: Anyone running a Pro Stock style engine/modern head..
 

Looking to try something different, maybe :)

I know Priddy and the Mountain View guys for sure. But they are in a different style racing than I'm talking about. Just curious is anyone out there has tried it? FWIW this would NOT be in 500" form

Re: Anyone running a Pro Stock style engine/modern head..
 

I understand that for sure but I thought it might be an example of the larger cube engine with a modern head you were after.

Re: Anyone running a Pro Stock style engine/modern head..
 

I personally never got real involved with any form of bracket racing but years back just playing around we built a "low buck" bracket car engine--- rebuilt a junkyard 500 CI Cadillac with ALL STOCK PARTS for less than probably maybe a thousand dollars tops--- never ran it over 4900- 5000 RPM almost totally stock maybe an electronic ignition and some type of carb change don't remember--- tons of torque low maintenance ran a whole year didn't change the oil didn't change the plugs NOTHING maybe 250 passes--- never took the valve covers off--- totally foolproof -- won a bunch of money and just sat back and watched all the other racers thrashing and all--- do not see why you need the latest trick of the week or $10,000-$50,000 plus Reher Morrison engines or any builder to race-- all you are doing is running a .90 number whatever that number might be---do it he cheapest most efficient way you can--my 2 cents --FED 387

Re: Anyone running a Pro Stock style engine/modern head..
 

Al,
years ago Donnie Pedan was running a 737 5" bore motor in SG, he was running 194 mph in SG, was there and saw it with my own eyes. Go big brother!

Nick

Re: Anyone running a Pro Stock style engine/modern head..
 

Nick,
Who do you feel are the BIG mph cars in S/G now-a-days in any division?
Just curious....

Re: Anyone running a Pro Stock style engine/modern head..
 

Over the years, I have seen many times where someone in a fast top sportsman car will put a throttle stop on their car and run a couple races with it. Then brag about how fast they were. To me that's not a super gas car. Can it cut a light to be competitive? Can you come half way close to dialing the car?
With all the reliable power available to us now, 180 mph in a legit super gas car is not all that uncommon anymore. I'm not even sure I could name off all the guys going that fast. There's becoming a lot of them!

Re: Anyone running a Pro Stock style engine/modern head..
 

Well I am just going back to S/ST so don't need t worry about 180 :) I was just curious if anyone was dong this at all let alone with success. Like you say making A run with alot of MPH is not what I am after. Looking to go back to what I had, a dialable, predictable relatively maintenance free dea, that can run decent MPH..