CLASS RACER FORUM - Russ linke

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)

- - Russ linke (https://classracer.com/classforum/showthread.php?t=83041)

It shows Russell link on qualifying page but does not show him running 1st round at maple grove. What happened?

theres a posting a bunch of cars pulled for teardown & he was found with too thin head gaskets

Quote:

Originally Posted by Kdw1403 (Post 667584)

It shows Russell link on qualifying page but does not show him running 1st round at maple grove. What happened?

Quote:

Linke's issue was a head gasket, it was around.020 to thin.

Glad you asked..There doesn't seem to be much interest.
For you that don't build your own engines, this is about a full point of compression.
We're talking about tenths here, not hundredths.
That being said, I never met the man. I don't care one way or the other. I don't even race NHRA, and not the one who reported it.
;-)

Thanks for the info.

Quote:

Originally Posted by Mark Yacavone (Post 667592)

Mark- There is plenty of interest here in the pits - most are glad the NHRA are finally taking interest back in our sport and just as many are sad that 'Bubba' got tossed - he's a good guy who like many doesn't build his own engines .As for his gasket giving him tenths - I don't think so ! !

Bubski thinking that's about 7/10s of a point in compression !! a nice gain for sure !! Bubski also applauds NHRA for stepping up and teching the racers like old times !! As far as that's the way my engine builder built it !! Bubski's thinking that's BS !! Bubski Can't think of a professional stocker engine builder who would blatantly cheat with a specification thats a numerical value and cannot be argued with !! enhanced heads and intakes are gray areas !! numerical specs like cam lift ,deck clearance , bore , stroke etc are in no way vague !! And anyone who is sad cause this guy got tossed is an out right liar !! Bubski's sure many a racer got beat by him in his illegal state !! Thanks NHRA for doing what needs to be done in class racing !!

So the deck clearance must have been wrong, you're allowed use any thickness head gasket to get the correct deck clearance.

Both the deck and the gasket thickness have to add up to the published spec or larger. Anything less is wrong.

It looks like the 260hp. gasket was used instead of the 285hp gasket. .018'' difference in thickness.

Quote:

Originally Posted by bubski (Post 667599)

Mr.Bubski- I am sad as are others - Bubba Linke is a true sportsman and is well respected in the NHRA ranks and the business world .I personally have not seen his tech sheet so i have no idea how big the infraction was .And BTW ,you can call me a liar all you want but ......

Jack. I also like Bubba. Let’s get real. .022 deck height is worth about 1 point in compression. One point of compression is 3-4 % power increase. That’s about 15 HP.