CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Front end wieght of 1969 Nova (https://classracer.com/classforum/showthread.php?t=8334)

jpmaher 12-14-2007 10:17 AM

Front end wieght of 1969 Nova
 
Help Please. My two sons and I race in the Pure Stock Muscle Car Shootout Drag Race. My youngest son Justin is restoring a 1969 Nova "SS396" 375 h.p. 4-speed car. I want to buy a set of Morosso front drag springs for him for Christmas. For optimum ride hieght I need to know the front end weight of the car. His car is in pieces so we have no way of getting this data. My guess is that the car probably weighs about 3400 lbs (no option bench seat car) and has about 60% of that on the front end. Does any one have any data that could help?? Thank you much.

Bill Grubbs 12-14-2007 11:22 AM

Re: Front end wieght of 1969 Nova
 
In our car, we use the SBC springs (heavier of the two that moroso sels for SBC), straight out of the box. A good set of double adjustable front shocks will then optomize the combo. Ride height is perfect for a BBC 396/375 C/SA Stocker.

Bill

Grant Eldridge 12-14-2007 03:34 PM

Re: Front end wieght of 1969 Nova
 
I originally raced my '69 Nova with a small block, and bought the Moroso small block springs. When I switched to the BB it worked out well with the same spring. The car does sit a bit lower in the front but hooks up well and can have a lower attitude down track. We're getting 60 foot times of 1.41 with this setup and basic 3 way adjustable front shocks.The springs are now six seasons old, with no problems.

matt beumer 12-15-2007 01:05 PM

Re: Front end wieght of 1969 Nova
 
69 Nova "Stock Elim." 3500lb., front weight 1840lb. iron head BBC

Todd Bailey 12-15-2007 02:00 PM

Re: Front end wieght of 1969 Nova
 
Can anyone chime in with what springs to use if you run a small block in this same car? Moroso SB springs with a coil cut off? I have heard that some use 6-cylinder springs.

Thanks

James Perrone 12-16-2007 10:13 AM

Re: Front end wieght of 1969 Nova
 
Moroso small block springs.with 1/2 coil cut off.

Todd Bailey 12-16-2007 03:17 PM

Re: Front end wieght of 1969 Nova
 
Thanks for the info guys.

Smink 12-16-2007 05:34 PM

Re: Front end wieght of 1969 Nova
 
Moroso 47150 ..........

If ride height is high, don't cut them until you tie the front end down with trailer tie downs for at least a week.

jpmaher 12-17-2007 10:02 AM

Re: Front end wieght of 1969 Nova
 
Thanks everyone for your helpful comments, But I got confussed after message #6 in regard to who the tips were for. So, what I see is that the front weight of this car is 1840#'s and I can eighter run a Morosso #47150 or small block springs for a car with A/C. Is that correct??

Todd Bailey 12-17-2007 02:43 PM

Re: Front end wieght of 1969 Nova
 
JP,

My apologies for high-jacking your thread. Sorry for adding to your confusion on this topic but, while everyone was adding their comments, I decided to ask their opinions on a SB spring. This has been one area that has always been gray for me. Hope you were able to find some help here. These guys have a ton of knowledge on this site. Good luck in your racing endeavors.


All times are GMT -4. The time now is 02:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.