Ken Keir wheelie bar?
 

How long are the Keir single wheel wheelie bars? How much can you adjust them up/down?

Re: Ken Keir wheelie bar?
 

I believe there's 2 lenghts they make . The single bar comes in two pieces. You can drill several position holes and adjust it to what works on your car. When weld it .
Call Ronnie there, he will answer as your questions.

Steve Teeter Stk/SS 620

Re: Ken Keir wheelie bar?
 

The one on my car is 48 inches long. The adjustment is infinite with the slip tube. I just have a bolt through mine and did not weld the slip tube to allow for more adjustment later. I can tell you that Kens work is absolutely beautiful and top quality. I put studs in the housing to make hanging the wheelie bar easier. Its super nice when changing a ring and pinion the wheelie bar is completely out of your way.

Re: Ken Keir wheelie bar?
 

Once you have the bottom bar pinned or tig welded there is about 3 3/4 inches of adjustment in the bottom bar. The bar has left and right hand rod ends in it so just break the jam nuts loose and you have 1 7/8 inches up or down.
Ken Keir

Re: Ken Keir wheelie bar?
 

Got it, Thanks What lengths do you build them?

Re: Ken Keir wheelie bar?
 

We make 44,48,51 3/4 and 53. We stock 48” for Stockers and SS.
Ken Keir

Re: Ken Keir wheelie bar?
 

Agree 110% with Mike. Beautiful work, only outdone by their customer service. Ken and Ronnie made me feel like I was their only customer, and the end product was outstanding.