CLASS RACER FORUM - View Single Post

Tony Curcio · 01-22-2009, 07:58 PM

I ran a 2bbl 350 in IHRA Pure Stock about 4 years ago. We ran the .018" shim gasket, but I don't remember the deck height. I'll see if my brother remembers, or if we have any notes on it. It was probably very close to the spec minimum.

This engine had cast pistons, 040 over, and was shifted at 5700 RPM.

01-22-2009, 07:58 PM	#9
Tony Curcio Member Join Date: Mar 2002 Location: West Chester, PA Posts: 271 Likes: 1 Liked 4 Times in 1 Post	Re: piston to head clearance I ran a 2bbl 350 in IHRA Pure Stock about 4 years ago. We ran the .018" shim gasket, but I don't remember the deck height. I'll see if my brother remembers, or if we have any notes on it. It was probably very close to the spec minimum. This engine had cast pistons, 040 over, and was shifted at 5700 RPM. __________________ Tony Curcio 1860 STK