CLASS RACER FORUM - View Single Post

Bruce Noland · 02-26-2009, 11:58 AM

Tim,

A good 396 will make approximately 580 (1.45 to 1.5) on the Dyno. A good 427 will make between 600 to 615 (1.45) on the dyno. You can take several of these cars to mine shaft or factored tracks and put up 9.70 numbers. Racers have worked for 20 years to get these numbers on the track, however their baseline dyno power multipliers are still 1.45 to 1.5.

When it comes to power, I'll gladly swap a Cheverolet Big Block for your 331 cubic inch Supercharged motor.You aren't denying the power number of 1.8 for your motor! Are you?

How much power are you guys making with this CJ motor Tim? A CJ has already put down a 9.78 in only it's second time at a sanctioned event. How much are you guys still holding? At this point, time is on our side. You guys have barged into Stock classes and had your way. Now we'll sit back and watch the numbers.

How much power is that little 331 Supercharged motor making? You can do it.

02-26-2009, 11:58 AM	#4
Bruce Noland VIP Member Join Date: Jun 2002 Posts: 1,855 Likes: 83 Liked 444 Times in 145 Posts	Re: Mustang MPH? Tim, A good 396 will make approximately 580 (1.45 to 1.5) on the Dyno. A good 427 will make between 600 to 615 (1.45) on the dyno. You can take several of these cars to mine shaft or factored tracks and put up 9.70 numbers. Racers have worked for 20 years to get these numbers on the track, however their baseline dyno power multipliers are still 1.45 to 1.5. When it comes to power, I'll gladly swap a Cheverolet Big Block for your 331 cubic inch Supercharged motor.You aren't denying the power number of 1.8 for your motor! Are you? How much power are you guys making with this CJ motor Tim? A CJ has already put down a 9.78 in only it's second time at a sanctioned event. How much are you guys still holding? At this point, time is on our side. You guys have barged into Stock classes and had your way. Now we'll sit back and watch the numbers. How much power is that little 331 Supercharged motor making? You can do it. __________________ Bruce Noland 1788 STK Last edited by Bruce Noland; 02-26-2009 at 12:01 PM.