CLASS RACER FORUM - View Single Post

bkeesee · 03-16-2009, 06:47 PM

Cleaning out the garage in preparation to move and I'm tired of lugging some of this stuff around so it's got to go.

-Bare block- Large journal mains w/ steel 4 bolt caps, filled to bottom of water pump holes, 3.935 bore(+.060 283 or 307) one cylinder dinged up from dropped valve so might need 1 sleeve to repair- no cracks --Make an offer

- 2 sbc 327 steel cranks{3.25 stroke}, one is large journal main, small journal rod both standard the other
one is a small journal on mains and rods and has been turned either .020 or .030( I can't remember)
$150.00 for the first one $80.00 for the second

- 2 SBC solid roller camshafts $150.00 each

#1-Lunati Grind #RRA 326/336 Intake .703 / 285@.050 Exhaust .652 / 296@.050 w/ 1.5 rocker 109 L/C

#2-Lunati part #50141-108 grind # RRA-284-285, Intake LOBE LIFT .468 /284@.050 Exhaust LOBE LIFT
.420 / 285@.050 108 L/C

New (old stock) set of Speed Pro piston rings 4.035 bore, .043 top,1/16 2nd, 3/16 oil - part # N9785-035
$50.00

Hays 168 tooth 40# steel billet flywheel(used) $100.00

Will consider all offers- Prices don't include shipping

Possibility of doing some trading for a Holley Pro Dominator or Victor Ram tunnel ram intake for a SBC

Can deliver to Farmington Dragway or anywhere in Winston-Salem, NC area.

03-16-2009, 06:47 PM	#1
bkeesee Junior Member Join Date: May 2008 Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	Garage Sale Cleaning out the garage in preparation to move and I'm tired of lugging some of this stuff around so it's got to go. -Bare block- Large journal mains w/ steel 4 bolt caps, filled to bottom of water pump holes, 3.935 bore(+.060 283 or 307) one cylinder dinged up from dropped valve so might need 1 sleeve to repair- no cracks --Make an offer - 2 sbc 327 steel cranks{3.25 stroke}, one is large journal main, small journal rod both standard the other one is a small journal on mains and rods and has been turned either .020 or .030( I can't remember) $150.00 for the first one $80.00 for the second - 2 SBC solid roller camshafts $150.00 each #1-Lunati Grind #RRA 326/336 Intake .703 / 285@.050 Exhaust .652 / 296@.050 w/ 1.5 rocker 109 L/C #2-Lunati part #50141-108 grind # RRA-284-285, Intake LOBE LIFT .468 /284@.050 Exhaust LOBE LIFT .420 / 285@.050 108 L/C New (old stock) set of Speed Pro piston rings 4.035 bore, .043 top,1/16 2nd, 3/16 oil - part # N9785-035 $50.00 Hays 168 tooth 40# steel billet flywheel(used) $100.00 Will consider all offers- Prices don't include shipping Possibility of doing some trading for a Holley Pro Dominator or Victor Ram tunnel ram intake for a SBC Can deliver to Farmington Dragway or anywhere in Winston-Salem, NC area.