View Single Post
Old 03-22-2009, 10:34 AM   #8
FED 387
VIP Member
 
Join Date: Jun 2006
Posts: 3,423
Likes: 541
Liked 333 Times in 180 Posts
Default Re: Oil contamination

Some brands of oil will turn milky more than others--- For example Valvoline is/was not as bad as Pennzoil- We chased what we thought was a bad gasket only to find in our case it was condensation--- It is probably just condensation---Make sure you have your crankcase vented somehow either to the exhaust or by a vacuum pump. Clean off the v. covers a few times with brake clean eventually it will go away----Try leaving the valve covers off for a bit when the engine gets hot to let the steam escape some times that helps too. Try another brand of oil too see if that helps. Comp 387
FED 387 is offline   Reply With Quote