CLASS RACER FORUM - View Single Post - LS series, 6.0 iron block overbore allowance

RJ · 04-03-2009, 06:48 PM

I've never sonic checked a 6.0 block, but have seen a report on one that was done. Worst hole at stock 4.000" bore was .098" on non thrust, .295" on thrust side.

04-03-2009, 06:48 PM	#2
RJ Member Join Date: Oct 2002 Posts: 248 Likes: 0 Liked 0 Times in 0 Posts	Re: LS series, 6.0 iron block overbore allowance I've never sonic checked a 6.0 block, but have seen a report on one that was done. Worst hole at stock 4.000" bore was .098" on non thrust, .295" on thrust side.