CLASS RACER FORUM - View Single Post

blapane · 04-11-2009, 03:30 PM

I'm replacing the "D" bar in my 69 camaro coupe.
Because of poor welding by previous builder.
The NHRA rule book reads That .125 plate top and bottom of floor bolted with 4 3/8 bolts is acceptable. Then in a another paragraph it reads " must" be welded to sub frame connector.
what repair would pass tech?
Any help would be great!
Brad

04-11-2009, 03:30 PM	#1
blapane Junior Member Join Date: Feb 2009 Posts: 3 Likes: 0 Liked 0 Times in 0 Posts	69 camaro roll bar I'm replacing the "D" bar in my 69 camaro coupe. Because of poor welding by previous builder. The NHRA rule book reads That .125 plate top and bottom of floor bolted with 4 3/8 bolts is acceptable. Then in a another paragraph it reads " must" be welded to sub frame connector. what repair would pass tech? Any help would be great! Brad