Quote:
Originally Posted by Ben Kallies
Chad, I run a Jerico 4-speed with a Mcleod soft-loc. I had around 900-950 lb of pressure at the time. My 60 ft times were around 1.52 tripping the lights with the rear tires. I agree that a competent machine shop can turn the ring gear down, but I figured that you're going to want to have it heat treated again after the machining is done. That seems like a lot of hassle to change gears, not to mention the cost. What combination do you run? -Ben
|
427/235 stocker. th-350. avg 60' in the mid 1.30's ( one 1.40 on the rear tires)