CLASS RACER FORUM - View Single Post

Michael Pliska · 05-31-2009, 12:24 PM

Assuming the two accessory bolt holes were originally the same distance from the deck, it looks like they have had an angle cut equal to 0.86° (the holes are 6.72" apart, and the exhaust side one is 0.101" closer to the deck surface). Is this a typical angle cut?

Thanks,

05-31-2009, 12:24 PM	#5
Michael Pliska Member Join Date: Oct 2008 Location: Happy Valley, OR Posts: 260 Likes: 0 Liked 0 Times in 0 Posts	Re: GM Head Questions Assuming the two accessory bolt holes were originally the same distance from the deck, it looks like they have had an angle cut equal to 0.86° (the holes are 6.72" apart, and the exhaust side one is 0.101" closer to the deck surface). Is this a typical angle cut? Thanks, __________________ Michael Pliska 643 S/G