CLASS RACER FORUM - View Single Post

SPS · 06-30-2009, 06:21 PM

OK, from first hand experience:
A number of years ago in my SS/BM car, I built a cool can in the trunk on the return/bypass side of the pump.

Was told by NHRA tech to take it off. There is a rule (written or un-written) that says the cool can must be in the supply line and within a certain distance of the carb. In the engine department.

I thought it was a good idea, and I believe it worked too, but it went away.

FJ

06-30-2009, 06:21 PM	#6
SPS Member Join Date: Jun 2004 Location: Cayuga, Canada Posts: 298 Likes: 37 Liked 3 Times in 2 Posts	Re: Cool can installation OK, from first hand experience: A number of years ago in my SS/BM car, I built a cool can in the trunk on the return/bypass side of the pump. Was told by NHRA tech to take it off. There is a rule (written or un-written) that says the cool can must be in the supply line and within a certain distance of the carb. In the engine department. I thought it was a good idea, and I believe it worked too, but it went away. FJ