CLASS RACER FORUM - View Single Post

Doug Domm · 07-01-2009, 08:46 AM

I put an S&W kit with the optional rear bars passing through the rear parcel shelf to retain the back seat in my 67 Chevelle and it fit PERFECTLY!!!!!!! It looks like it could have come from the factory. The main hoop touches the headliner and by tipping the main hoop forward there was enough room to weld the top of the hoop. The main hoop comes within 1/4 inch of rear side panel. I had the side bars bent down to front frame rails to make it fit and still keep the front arm rests. The folks at S&W are very friendly and accommodating and for sure the first people I would call in the future. Hope this helps.

07-01-2009, 08:46 AM	#5
Doug Domm Member Join Date: Apr 2006 Location: canada Posts: 251 Likes: 29 Liked 84 Times in 21 Posts	Re: CM cage for stock eliminator. I put an S&W kit with the optional rear bars passing through the rear parcel shelf to retain the back seat in my 67 Chevelle and it fit PERFECTLY!!!!!!! It looks like it could have come from the factory. The main hoop touches the headliner and by tipping the main hoop forward there was enough room to weld the top of the hoop. The main hoop comes within 1/4 inch of rear side panel. I had the side bars bent down to front frame rails to make it fit and still keep the front arm rests. The folks at S&W are very friendly and accommodating and for sure the first people I would call in the future. Hope this helps.