View Single Post
Old 07-02-2009, 11:49 PM   #7
Todd Hoven
Guest
 
Posts: n/a
Default Re: Cool can installation

Bruce Bacholder told me today that the fuel pressure regulator and cool can have to be at least 6 inches FOWARD of the firewall. SO that ends that. Thanks to all who replied


Quote:
Originally Posted by SPS View Post
OK, from first hand experience:
A number of years ago in my SS/BM car, I built a cool can in the trunk on the return/bypass side of the pump.

Was told by NHRA tech to take it off. There is a rule (written or un-written) that says the cool can must be in the supply line and within a certain distance of the carb. In the engine department.

I thought it was a good idea, and I believe it worked too, but it went away.

FJ
  Reply With Quote