CLASS RACER FORUM - View Single Post - Rocker Arms- LT-1

Rich Biebel · 07-29-2009, 01:29 PM

Crane Nitro-Carb...if you can find any......and there were supposed to be some decent ones available from Competition Products......but I am not sure on that. I had Bullet springs...dampners broke.I Installed a set of Competition Products electroplated units and they held up fine. Comp cams springs and retainers are also good. There might be some beehives that would work well......PAC I think is the name that sells those and they have a website.....I was looking into those.......

07-29-2009, 01:29 PM	#2
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,315 Likes: 25 Liked 544 Times in 213 Posts	Re: Rocker Arms- LT-1 Crane Nitro-Carb...if you can find any......and there were supposed to be some decent ones available from Competition Products......but I am not sure on that. I had Bullet springs...dampners broke.I Installed a set of Competition Products electroplated units and they held up fine. Comp cams springs and retainers are also good. There might be some beehives that would work well......PAC I think is the name that sells those and they have a website.....I was looking into those....... __________________ Rich Biebel S/C 1479 Stock 147R Last edited by Rich Biebel; 07-29-2009 at 01:33 PM.