CLASS RACER FORUM - View Single Post

njk53 · 08-15-2009, 08:57 AM

JB Weld would be my choice. Look at their website they say their product is good for fuel cans and fuel tanks so I think it will be OK for your application. Once that stuff cures it is as hard as the sidewalk. It also can be drilled or machined. Drawback is it takes 24 hours to cure properly.

To be on the safe side, try a trial area on the materials you are going to epoxy to make sure it is compatable.

08-15-2009, 08:57 AM	#3
njk53 Senior Member Join Date: Jul 2007 Location: East China, MI Posts: 504 Likes: 0 Liked 0 Times in 0 Posts	Re: epoxy for use near gasoline JB Weld would be my choice. Look at their website they say their product is good for fuel cans and fuel tanks so I think it will be OK for your application. Once that stuff cures it is as hard as the sidewalk. It also can be drilled or machined. Drawback is it takes 24 hours to cure properly. To be on the safe side, try a trial area on the materials you are going to epoxy to make sure it is compatable. __________________ Nelson Kowal Stock 345