CLASS RACER FORUM - View Single Post

Alan Roehrich · 12-07-2009, 07:35 AM

A TH 350 is shorter than a 700 R4, and the mount is closer to the front. No, the original crossmember cannot remain in the same location. No problems with the tunnel. If you can find a car that was built with a 200 Metric, the crossmember, mount, driveshaft, and torque arm mount are where you need them. You will have a very hard time finding a TH 350 extension housing with the mounting holes and mounting bosses for the torque arm brackets.

12-07-2009, 07:35 AM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,113 Likes: 1,571 Liked 1,821 Times in 413 Posts	Re: 3rd generation Camaro A TH 350 is shorter than a 700 R4, and the mount is closer to the front. No, the original crossmember cannot remain in the same location. No problems with the tunnel. If you can find a car that was built with a 200 Metric, the crossmember, mount, driveshaft, and torque arm mount are where you need them. You will have a very hard time finding a TH 350 extension housing with the mounting holes and mounting bosses for the torque arm brackets. __________________ Alan Roehrich 212A G/S