Hot Rod magazine had an article back in the '90s about an engine based on that combination titled "The 350 Engine Chevrolet Should Have Built". The guy in the article used 6.2" rods, small port AFR heads, a 215 degree hyd roller cam, 11:1 compression, Edelbrock Perormer intake and carb. The engine made over 400 ft lbs of torque between 2800 and 5200 rpm and it ran on 87 octane gas. Worthy investment of time to read the article.
http://www.purplesagetradingpost.com...%20engine.html