CLASS RACER FORUM - View Single Post

Run to Rund · 04-20-2010, 11:52 AM

I have 3 pairs of Hoosier D07, 9x30 bias ply slicks. They don't lose air over time. I run tubeless, metal valve stems of course, blasted the steel wheels at the bead areas with 70 grit aluminum oxide media. The tires don't move. Screws are more important with tubes because if the tire turns, it will shear off the valve stem.

04-20-2010, 11:52 AM	#3
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 583 Likes: 8 Liked 54 Times in 27 Posts	Re: Tire mounting question I have 3 pairs of Hoosier D07, 9x30 bias ply slicks. They don't lose air over time. I run tubeless, metal valve stems of course, blasted the steel wheels at the bead areas with 70 grit aluminum oxide media. The tires don't move. Screws are more important with tubes because if the tire turns, it will shear off the valve stem.