CLASS RACER FORUM - View Single Post

Barnstorm · 07-27-2010, 12:53 PM

Yes... use the round seals even though Wilwood says use the square seals. I also put a 2in long compression spring over the cotter pin between the pads that retract them. Make sure there is no pressure in the lines by cracking open a bleeder. Lost 2 tenths and 5mph due to drag.

07-27-2010, 12:53 PM	#6
Barnstorm Member Join Date: Dec 2009 Location: Minnesota Posts: 186 Likes: 0 Liked 0 Times in 0 Posts	Re: wilwood caliper drag Yes... use the round seals even though Wilwood says use the square seals. I also put a 2in long compression spring over the cotter pin between the pads that retract them. Make sure there is no pressure in the lines by cracking open a bleeder. Lost 2 tenths and 5mph due to drag.