CLASS RACER FORUM - View Single Post

Kingpen · 07-27-2010, 06:19 PM

I have talked to some crank grinders(Bullet & Callies) and they cant really say yes or no on the subject...Ive also talked to one of the local grinders that says he did a 3.480 stroke big journal (2.100) down to the honda(1.880) for a dirt car 4 years ago and it is still going...I could see that working if it was offset ground to increase the stroke & maybe not be an issue on uncovering too much of the oil hole...........Vic

07-27-2010, 06:19 PM	#4
Kingpen Member Join Date: Feb 2006 Location: sooner state Posts: 105 Likes: 3 Liked 64 Times in 22 Posts	Re: SBC Small Jnl ground to Honda pin size I have talked to some crank grinders(Bullet & Callies) and they cant really say yes or no on the subject...Ive also talked to one of the local grinders that says he did a 3.480 stroke big journal (2.100) down to the honda(1.880) for a dirt car 4 years ago and it is still going...I could see that working if it was offset ground to increase the stroke & maybe not be an issue on uncovering too much of the oil hole...........Vic