[Tom Goldman]

Crank sensors will shut off a Mopar and not always leave a code. ....Also since a lot of work was done around the intake and exhaust ,check the wireing to all the sensors that use a 5v. reference , ie MAP ,CMP CPS ,O2 ,TPS ,ECT. ..... An intermittant short on the 5v circuit will shut down the PCM immediately and will not leave a fault code,as the PCM shuts down to protect its self. ...No data logged either..........I've seen stall outs like this many times ,where the rub on the wireing harness is barely noticable.......make sure the wireing is properly routed in all the stock retainers. .........Tom