View Single Post
Old 10-12-2010, 08:48 PM   #5
Sean Marconette
Senior Member
 
Sean Marconette's Avatar
 
Join Date: Mar 2006
Posts: 977
Likes: 796
Liked 275 Times in 76 Posts
Default Re: Open trailer setup

Whatever you do mount the winch so as it will not grow legs! I mounted mine under the trailer, and cut a hole where the rollers for the cable is above the steel floor. I have a recessed storage box in the front in between the D-rings. The recessed storage box is where the battery is located. I welded a structure across the underside and that is what the winch is mounted to. Someone would have to work hard to get it.
  1. 18'
  2. Steel Deck
  3. Dovetail
  4. Pull out Steel long ramps
  5. Electric Brakes on both axles
  6. Recessed 2.5'X2.5'X 14" storage box
  7. Breakaway
  8. Good digital proportional brake controller
  9. Sway control
  10. Load distribution hitch
  11. SPARE TIRE
These are not in order, but are what I feel are needed. The more storage that you have in the trailer, means less time loading and unloading the truck to go to and from the races. And also a good place to store the load leveling bars and sway when not used.

Good Luck

Sean
__________________
Sean Marconette
84 Mustang
5060 SS/N
Sean Marconette is offline   Reply With Quote