Dick,
Google: Z-spar Slash Zone Epoxy
Nice link about it on speed Talk. some good info:
http://speedtalk.com/forum/viewtopic.php?t=327
That link may only open for members. This is what one poster said:
Darin Morgan ยป Mon Sep 13, 2004 5:21 am
A-788 Splash Zone or Kop-Koat which ever name you prefer, is the ONLY epoxy I have ever seen that will stand up to the rigors of racing. If you use it with Alcohol you have to seal it with a clear coat paint in order to seal it off. You can use clear Acrylic or Emron clear coat. After you shape the epoxy to what you want, wash the head, dry it and clean it with Acetone. Then heat it up to 150 degrees and apply the Acrylic clear coat over the top of it and make sure to get the edges. Don't be shy with the stuff. Let it dry for 12 to 24 hours.
All epoxies will break down with Alcohol. Its just to corrosive. This procedure will make it last ten time longer.
Hope I didn't break any forum rules and the info helps.............................