Re: Wheelie bars
hey Rob....the Ken Keir bars will work on the 4th generation Firebirds and Camaros but from my own experience on a Camaro I did not anticipate the 12 bolt inspection cover relocation to allow for the aluminum "sandwich" plate that the bars mount to. In my case I had to buy the LPW ultra extra low profile cover to fit under the sway bar because the cover now sits further away from the housing. It comes with special Ken Keir length bolts to allow for the cover thickness. I ended up massaging the trunk floor pan to keep the bars from hitting, but I run mine very high just for safety 3-4 inches below the bumper. I did end up modifying the panhard bar, it was just too close to suit me. I hope this helps, but it is a very nice set up once you jump through all the hoops.
|