CLASS RACER FORUM - View Single Post

Grant Eldridge · 04-22-2011, 01:24 AM

Someone asked, so here's a photo of Clark's rocker. The cross inside identifies the marine 502 rocker, the insert is shown separately to one side....Sorry, I don't have a photo of the special high strength stud and adjuster that are used with the rocker arms. I went to these after noticing that the stock sized ARP studs used with the Crane rockers I had been using were bending as I turned the motor over due to the high spring pressures we were using......
Grant Eldridge

04-22-2011, 01:24 AM	#2
Grant Eldridge Member Join Date: Jul 2007 Posts: 124 Likes: 0 Liked 0 Times in 0 Posts	Re: Holroyd BBC Rocker Arms Someone asked, so here's a photo of Clark's rocker. The cross inside identifies the marine 502 rocker, the insert is shown separately to one side....Sorry, I don't have a photo of the special high strength stud and adjuster that are used with the rocker arms. I went to these after noticing that the stock sized ARP studs used with the Crane rockers I had been using were bending as I turned the motor over due to the high spring pressures we were using...... Grant Eldridge Attached Thumbnails