Re: High oil pressure?
Quote:
Originally Posted by Ed Wright
Charles, I have Honda rod bearings, std 350" mains and .904 lifters (bushed bores) in mine, and use a pump with shortened gears with a "stuffer" plate to cut volume. With zero wt oil it idles about 15 psi hot, goes to 40 by 2500 RPM. Cold it idles close to 40. Idle speed is 1600.
I don't think sharing what we have learned is stepping on toes.
Take care, Ed
|
What is it at the finish line?? My Corvette was dancing between 40 and 60 at 1000 feet when the car was on kill. Clutch it and kill it at the finish line or it would go to zero.
__________________
Scott Wilcox 2193 3x National Champion
SS/A, SS/B, SS/K, SS/L, SS/AM, A/SM, C/SM, B/A, C/A, G/A, H/A
|