[rickyr]

Originally Posted by Phillip marvetz

Yes those are the carbs. Race only. What about the secondary metering plates? Do the new manifolds need different tuning than the originals or the rat rosters?

The new intake should not need any different tuning.
For the sec. plates the stock ones will be = to about a 86 jet,
there are not any plates offered any larger than that
So if you cannot get it dialed in with the pri. jets all you can do is drill
the bottom holes .002” to .003” at a time.
but at wide open throttle it is running off of the Pri. and sec.,
so any change to the pri. will also help the sec.
you also might want to install the white springs in the sec. Dia.
to make them open quicker
they came with a plain spring
the spring kit is part # 20-13
you will need it 2 times
I hope this helps
Thanks Ricky R. Holley tech service