CLASS RACER FORUM - View Single Post

Robert Simpson · 08-03-2011, 09:29 PM

[QUOTE=Bob Mulry;272883]We just drilled the companion flange in 2 spots 180 degrees apart .250 diameter by the length of the magnet, epoxied them in place and fabricated a pickup mount out of angle iron that was drilled in 2 places and bolted to a rib on the housing..............

QUOTE]

Bob do you have a picture of your set up? This is what I was thinking of doing but I wanted to see what others are using. Thanks

Robert

08-03-2011, 09:29 PM	#6
Robert Simpson Senior Member Join Date: Aug 2004 Location: Jacksonville, Florida Posts: 808 Likes: 7 Liked 20 Times in 12 Posts	Re: 12 bolt pickup? [QUOTE=Bob Mulry;272883]We just drilled the companion flange in 2 spots 180 degrees apart .250 diameter by the length of the magnet, epoxied them in place and fabricated a pickup mount out of angle iron that was drilled in 2 places and bolted to a rib on the housing.............. QUOTE] Bob do you have a picture of your set up? This is what I was thinking of doing but I wanted to see what others are using. Thanks Robert